Mobile Elevated Work
Platform Training (MEWP)

OSSA EWP
$190.00

What is Mobile Elevated Work Platform Training (MEWP)?

This is the certified training course for workers who will be operating elevated work platforms such as genie lifts, aerial work platforms, boom lifts, and scissor lifts. It is a combination of in class learning and practical experience where the student must properly operate, inspect and maintain the lift.

Contact us to request group bookings for On-Site Mobile Elevated Work Platform Training Course in Devon & surrounding areas.


Offered at your worksite or our Leduc #1 Location in Devon

REQUEST GROUP TRAINING

 

Why is MEWP safety training important?

Elevated work platforms are a great tool for workers to use to quickly and safely access elevated work areas. They replace scaffold, lifts can make for great cost savings, when compared to the use of scaffold and fall protection. However, workers who do not understand the hazards of using lifts are at risk. In a ten year period from 1992 to 2003, just over 300 workers were killed from improper lift use, in the USA, according to the US Bureau of Labor Statistics. In Canada that number was about 30. Various causes exist, workers fell from lifts, were ejected, lifts collapsed, tapped over, and traffic collided with lifts. The reason these needless fatalities occurred, is because operators did not understand the limitations of their lift.

What will I learn in this certification course?

Upon successful completion of this course, you will be certified to operate a lift on the majority of sites in Canada. The course is 8 hours long, and begins with a class theory component. Workers learn about:

  • Lift definitions and names of the components.
  • Lift operation theory
  • Review of lift design and mechanical theory
  • Load charts and limitations of lifts
  • Common lift misuse scenarios
  • How to properly maneuver a lift

In the practical safety training the following elements are covered:

  • Workers must complete a lift inspection
  • Show proper understanding off all lift controls and emergency controls
  • Drive lift around an obstacle course
  • Show how to properly raise and lower the lift in various configurations

At the end of the training, workers will have a functional understanding of genie lifts, aerial work platforms, boom lifts, and scissor lifts, and be certified in the MEWP Mobile Elevated Work Platform Course.

Regular hours MONDAY–FRIDAY
8:00AM–4:30PM
Canadian Society of Engineering Safety Alberta Construction Safety Association Canadian Safety Standards Training Alliance Canadian Safety Standards Training Alliance Canadian Safety Standards Training Alliance Canadian Safety Standards Training Alliance Canadian Safety Standards Training Alliance