H2S Awareness training is finally available online. This course is designed for all industries, from Oil and Gas, to Utilities, Petrochemical, Pulp and Paper, Upgrading and Nuclear Power Generation. The course is designed to reflect the information taught in Enform H2S Alive course, and many companies chose to use our course to provide awareness to staff who will not be expected to rescue a co worker from an H2S environment.
Hydrogen Sulphide is fatal with even a single breath in concentrations above .07%, to put this into perspective, much of the western Canadian Sedimentary Basin has concentrations of 1% or more. Fields containing up to 45% are common along the Rockies. The biggest mistake untrained worker make, is overestimating their abilities to rescue a co worker. This typically leads to multiple fatalities.
The Online training video takes approximately 3 hours to complete, and contains a variety of video segments and activities. The activities are designed to ensure competence. After you finish the course, you can contact us for a 30 minute skills assessment (additional charge will apply), and you will receive a practical training certificate that meets requirements of the Occupational Health and Safety Code.
The activities completed in the optional practical skills portion are:
This course is designed to be similar to other industry standard H2S Training Courses.REGISTER NOW
Our online Fall Protection Training certification course provides workers with an understanding of workplace fall hazards, safety measures and fall arrest legislation. Additionally the course looks at industry standards, and applicable legislation.
Workers must have training in fall arrest and travel restraint, because fall are one of the leading causes of injury on worksites. The equipment that is used for fall arrest, and travel restraint, can be hazardous, if it is not used correctly.
Fall arrest and travel restraint and the two different types of systems discussed in the training course. Fall arrest stops the fall once begun and travel restraint, prevents a worker from getting to an edge from which a fall could occur. The course also looks at other methods of protection such as control access zones, guardrails, work positioning, and safety nets.
Additional topics discussed in this course include:
The duration of this course is approximately two and a half hours. Upon successful completion of the online fall protection training course, participants will receive a certification card.REGISTER NOW
Ground Disturbance training is required for anyone who excavates or disturbs the ground. This course is certified by the Alberta Common Ground Alliance, and is recognized just like the Global Ground Disturbance Level II course. The online training format is superior, as it is much more visual than the classroom based course, and more convenient as it can be taken whenever you have time.
Hitting an underground facility such as a gas, fiber optic, electrical, water or sewer can have serious consequence in terms of safety, damage to reputation and cost. Workers can be seriously injured or killed during a strike, and the cost can run into the millions of dollars. Many businesses simply have to close their doors, after a strike.
This certification course is comprehensive and the following element will be covered:
Up until this year, workers were trained in WHMIS. However, starting in 2015, and phasing in over the next couple years, WHMIS will be changing slightly to include GHS. GHS stands for the Globally Harmonized System. GHS is a internationally recognized set of standardized symbols and labels. The main requirements of the system has not changed, rather that visual data, such as supplier labels and pictograms will be updated.
Each year, approximately one third of all the fatalities that are attributed to the jobsite, are due to exposure to chemicals that workers have used over a long term in the in their career. For example, welders will oô€…Œen be diagnosed with neoplasmâ€™s and tumors from exposure to welding fumes, sandblasters and those who work around coal can develop silicosis. The WHMIS Systems teaches you how to protect yourself, by understanding information on labels, MSDS and SDS and what PPE to use.
This online course provides the legislated requirements on the required topics of the Workplace Hazardous Materials Information System and Globally Harmonized System.
The following topics are covered:
This course takes approximately 90 minutes to complete and workers will receive a WHMIS 2015 and GHS certification card upon completion.REGISTER NOW
Online TDG training teaches workers how to properly label and document shipments of dangerous goods, as a precaution, in case the load is damaged, during transport, and emergency services workers need to clean up the hazardous material. It is a system of shipping documents and a placard system that allows police, fire fighters and ambulance quickly and accurately identify the hazards relating to the spill, and properly protect themselves.
It is important that anyone who handles, stores, receives or transports dangerous good understand what role they have in labeling and documenting shipments. The fines for non compliance are large, and can include jail time.
This online TDG training course covers the information needed to transport dangerous goods in Canada.
By the end of this course, learners should understand the regulations governing the transportation of dangerous goods on, classifications of dangerous goods, TDG symbols on placards and labels, TDG document requirements, and emergency response requirements in the event of an accidental dangerous goods release/ spill.
Topics included in the course are as follows:
This online transportation of dangerous good course takes approximately 2.5 hours to complete, and you will be emailed a printable certification card immediately upon the completion of your course.REGISTER NOW
Most industrial and commercial workers come into contact with various controlled products as part of their daily job duties. As such they are often responsible for handling, storing, and shipping these substances. As such, they are trained in both the Workplace Hazardous Materials Information System (WHMIS) and the Transportation of Dangerous Goods (TDG). This 2 in 1 course provides a convenient way for workers to get a certification in both course.
This course is bundled as both the WHMIS and TDG course for your convenience. The majority of industrial workers require both courses, and this package will get you trained.
The following topics are covered in the two courses:
TDG Training and TDG certification requirements
The total time to complete both of these programs is 3 hours. Upon successful completion of a the exam, students will be issued a certification card that is valid for 3 years for both WHMIS and TDG.REGISTER NOW
This course covers information for workers who enter confined spaces and those who act as a safety monitor for workers entering confined spaces. Training is required for workers who enter and monitor confined spaces.
The New Zealand department of labour calculated that working in a confined space was 150 times more dangerous that doing the same task outside of a confined space. Hazards in confined spaces are significant, oxygen deficiency, toxic gases, asphyxiates, mechanical hazards, and engulfment are just a few of potential threats to life. Training increases your awareness, and ability to recognize dangerous situations.
This Online Training Certification course covers the same information as the classroom based course. Topics include:
The certification is valid for 3 years, and issued upon successful completion of a test. Basic information of confined spaces in Western Canada is covered in this course. The confined space entry and monitor Course completion takes 3 hours.REGISTER NOW
An Arc flash is the heat and light produced from an arc of electricity, the temperature can reach 19 000 degrees Celsius. Workers need to understand what causes them to occur and the risks. Using the correct procedures when the potential exists, reduces the chances of an Arc Flash occurring, and the severity of the consequence if one does happen.
The risk of an Arc Flash occurring is a potential for anyone working around electricity, not only electricians. Industrial workers, who work around circuit breakers, breaker boxes, and industrial wiring are at risk. The consequence of an arc flash can be devastating, death, serious burns, and blindness are just a few of the potential health effects.
The topics in this course are as follows:
This course takes approximately 90 minutes to complete and you will be emailed a certification card immediately upon completion of the online course. The online Arc Flash certification course is valid for three years.REGISTER NOW
Our online Bear Awareness program relays information that is important to individuals who spend time working, hunting, or enjoying outdoor and recreational activities in bear country. This course will help you to become more knowledgeable about your surroundings and prepare you to effectively handle a situation where bears may pose a threat to you. This course is designed to educate workers. Ohs requires workers to be educated on hazards that may affect them.
The probability of an encounter with a bear is low, however knowing what to do, if the situations occurs, will save your life. The online format is a convenient way to get the training, without a large outlay of your time.
The following topics will be discussed:
This online Bear Awareness training course is approximately 75 minutes in duration. There is a test at the end of the course and a certificate will be issued upon successful completion.REGISTER NOW
This online driver training course provides instruction on how to perform vehicle inspections that comply with the National Safety Code. While most vehicle inspection courses only list the items that need to be inspected, this course goes further by using professional videos to show truck drivers how to perform required truck inspections. Additionally, this course explains how to react to potential vehicle defects that are found during a vehicle inspection.
Understanding and effectively applying the vehicle inspection concepts explained in this online course will help truck drivers keep their vehicle road safe.
In this online Pre Trip Inspection course, the following topics discussed:
This online certification course for Daily Pre Trip Inspection takes about 90 minutes to complete and you will be issued a certification card immediately upon completion of the training.REGISTER NOW
This online 3 Demerit Reduction Course is approved by the Alberta Government for reduction of 3 demerits points from an Alberta operatorâ€™s licence. You are able to do this course once every two years. Once completed you will need to register your information online at DriversRegistraton.ca. A government noticeâ€ofâ€completion ton form will be mailed to you within 7 business days. Bring your noticeâ€ofâ€completion form together with your online Defensive Driving program certificate of completion to a local registry office in Alberta.
This course is important for anyone who wants to clean up their driving record. If you need to drive to work, or for work, this course can keep you on the road. It may also save you money on your insurance.
This is a comprehensive defensive driving program that also is approved for demerit reduction. The course focuses on how to reduce risk when driving, topics include:
This online Three Demerit Driver Reduction Course takes 6 hours to complete and upon successful completion of the exam, you will be issued a certificate of completion.REGISTER NOW
This online Commercial Vehicle Driversâ€™ Hours of Service course covers Canadaâ€™s Federal Hours of Service regulations. The program looks at fatigue and the human body, together with sleep cycles and the requirements for Sleeper Berths.
It is intended to help drivers and carriers understand and increase their compliance with the regulations. It also keeps you safe, by teaching you about sleep cycles and fatigue. Driving can be monotonous and lack of attention for even a split second can have life changing consequences.
This online Hours of Service course takes four hours and upon successful completion of the knowledge exam, a certification card will immediately be emailed to you.REGISTER NOW
The Crane Safe Rigging and Slinging Practices course covers best practices and techniques to safely sling and rig loads for lifting according to the CSA (Canadian Standards Association) Z150â€98 regulation, which is applicable across Canada. It additionally covers to ANSI (American National Standards Institute) and ASME (American Society of Mechanical Engineers) standards.
Dropping a load, due to improper rigging, or failure of a sling can have serious consequences. Many incidents have occurred due workers not understanding the load rating on a sling, and not understanding how to properly rig a load, to prevent it from shifting or moving while being lifted.
The training course topics are as follows:
This online Safe Slinging and Rigging course is approximately five and a half hours in length. Upon successful completion of a knowledge exam, students will be issued a certification card.REGISTER NOW
This course is designed as a theory training course for workers who use aerial work platforms and scissor lifts. Some companies refer to this course as Elevated Work Platform training. Upon completing the employer can verify competency with a practical knowledge session.
Improper operation of a Elevated work platform, Aerial lift or Scissor lift can have serious consequence. If operated beyond their capabilities, they can collapse, tp over, or eject you. Knowing the limitations of your equipment will prevent mistakes.
This training certification course looks at the following sections:
Upon successful completion of this online certification training course for Aerial Lifts, Scissor Lift and Elevated Work Platform, you will be emailed a card, for your records.REGISTER NOW
This allâ€inâ€one training course makes it easy to train your forklift operators as it covers safety topics that are critical to avoiding accidents and injuries including general safety, preâ€operation, operation, load handling, fuel/battery maintenance, and specialized units.
Forklifts are common tools in many work environments, and without much thought, they seem relatively benign. However they are dangerous with the proper training on how to recognize hazardous situations. This online format is convenient and cost effective way to train those who will be expected to operate a forklift.
The following topics are covered in this course:
This online certification course for Forklifts take 90 minutes to complete and can be combined with a practical activity. Upon completion of the online portion you will be issued a certification card.REGISTER NOW
This course is designed to cover safe, effective chainsaw work. We review required protective equipment for use in the forestry industry, the essential tools for the trade, and knowledge of the chainsaw components and operation. Saw maintenance and sharpening are covered as well. The course also covers effective treeâ€cutting techniques, including notching and cutting, lambing and bucking. There is a strong emphasis on safety.
Chainsaws have a history of being problematic at worksites, if used incorrectly, they have big potential to maim or kill workers. There a lot of ways to incorrectly use a chainsaw. This course is designed to create awareness for workers who occasionally use chainsaws at worksites. In 1999 the CPSC found that there were over 28,500 reported injuries in the United States In 2004, the number had increased to 32, 000. Accidents and Injuries are common to the chain saw operator who lacks proper training.
This course has Sections on forestry danger zones and hazardous trees, operator fatigue, and proper operator stance. It will ensure that students will go into this oftenâ€dangerous work environment with a respect for and knowledge of the job.
This online chain saw operator training course is approximately 90 minutes long. At the end of the course, there is a test, and a certificate will be issued upon completion.REGISTER NOW
This interactive training course applies to all employees who are, or may be, exposed to air contaminants above the permissible exposure limits (PELs) or suggested exposure levels. This course may also be used for respirator use that is required by company policy or that is voluntary.
Improper use of a respirator has serious consequence. Over exposure to a dust, mist, fume, gas or vapor can have immediate and long term health effects. Making sure workers understand the limitations of their PPE will make sure them correctly use a respirator.
The following topics are covered in this course:
This Respirator Training course is one hour long and upon completion you will be emailed a certification training card.REGISTER NOW
Fire extinguisher training teaches you about fires, fire hazards and how to extinguish them using a fire extinguisher. Understanding how a fire extinguisher works, if vital to understanding its limitations. This course is offered in a convenient online format, to save you time and money, and still ensure your workers are trained.
Among all the safety problems an employee can encounter, fire can be the most frightening. Every year fires cause hundreds of millions of dollars in damage and result in thousands of employee injuries, a number of which are fatal. Yet many of these catastrophes could have been prevented if the fire had been extinguished before it started to spread.
Using a powerful combination of audio, full-motion video, text, and colorful graphics, this online Fire Extinguisher Use course looks at why things burn, reviews the types of fire extinguishers that are found in facilities today, and discusses how to use fire extinguishers to fight small fires. It's divided into topic-based lessons so information is easily understood and retained.
Upon successful completion of this online Fire extinguisher training course, you will be emailed a certification training card. The course takes approximately 90 minutes to complete.REGISTER NOW
This program explains the techniques, equipment and legal requirements for traffic control workers in a road and construction environment. It will explain to the student the importance of wearing the proper reflective clothing, how to safely control traffic in a variety of construction situations, and lays out the general safety and legal requirements as per the Ontario Health and Safety Act and Construction Regulation 213/91 and the MOT, Ministry of Labour. By the end of this course, you will be an efficient traffic control person.
Being a flag person can be a dangerous job. Drivers may not always see you, and the flag person is directly in the line of fire. In the last decade, many flag persons have lost there lives, doing what seemed like an easy job. Using the correct techniques will keep you and the rest of the construction crew safe.
The following topics are discussed in this course:
This Traffic Control Person for Construction Road Work elearning course is approximately 1 hour in duration. Upon successful completion of an exam, you will be issued a certification card.REGISTER NOW
Beyond the courses listed here, we also offer courses on safe driving, workplace training, inspections, harassment, and many other topics. Just click on the link to explore all they we have. Most of the online training can be completed in one to three hours from your home or office. Once you are done, simply print your certificate of training out from your computer. Most courses are accepted by employers.